Bronson G2 Bearings Review
Bronson G2s are probably the best bearings you can get for £20. I think they get overlooked for Bones Reds far too often, which is a shame because they’re a quality bearing for the money.
They retail at £19.95, and we regularly have sales, so check the bearings section before picking up a set.
What Are You Getting for £20?
The G2 sits below the G3 in Bronson’s range, but shares its deep-groove raceway design, removable shields and ceramic-additive oil. There’s enough going on here to make them worth considering without spending another tenner.
Bronson says the deeper raceways help reduce side-impact damage, while the shields help keep the oil in and dirt out. They’re removable for cleaning too, if you’re someone who actually gets round to doing that.
The appeal is fairly simple: decent, serviceable bearings at a sensible price. If you’re replacing worn-out bearings or putting a complete together, £20 is a reasonable part of the budget to put here.
It also leaves you some money for the other bits you might need. Have a think about the whole setup rather than picking the most expensive version of every part. If you need grip, hardware and wheels as well, it adds up fairly quickly.
What Do the Deep-Groove Raceways Do?
The raceways are the tracks inside the bearings. Bronson’s design puts the balls deeper into those channels, which the brand says helps reduce damage from sideways impacts.
That’s the explanation behind the name. It’s a construction detail intended for the demands of skating, rather than a claim that your board will suddenly roll twice as fast.
It’s also something the G2 shares with more expensive models in the range. Buying the cheaper bearings doesn’t mean missing out on every feature Bronson talks about. The G2 has enough of the core design to be worth considering in its own right.
You can look through the specifications in Bronson’s bearing guide. For a £19.95 set, there’s a decent amount of thought in there.
G2s or Bones Reds?
Reds are probably the first bearings a lot of people think of when they need a new set. Plenty of skaters have been buying them for years, so it’s understandable.
I’d go for the G2s at this price, though. Reds being the familiar choice doesn’t mean they should be the automatic one, and I think Bronson deserves more consideration here.
That’s my preference rather than a stopwatch comparison. If you like your Reds, fair enough. But next time they need replacing, G2s are worth a go.
There’s no need to bin a working set to try something different. This is more a recommendation for when yours are actually due changing. If you’re already looking at replacement bearings around the £20 mark, put these on the list as well.
Shields and Everyday Wear
The G2 has removable rubber shields to help keep oil in and dirt and moisture out. Keeping them fitted gives the inside of the bearings some protection from the dust and grit you pick up while skating.
Bronson describes the shields as pop-off resistant. That refers to the shields staying in place, rather than a promise that the whole bearing can’t break.
They’re useful for everyday wear, but they don’t make the bearings waterproof. Repeated wet sessions are still going to be harder on a set than dry ones, especially if the board gets put away wet afterwards.
What Are Bronson G2 Bearings Made Of?
G2s use chrome steel balls and races, a nylon cage and removable rubber shields. The cage keeps the balls spaced inside the bearings, while the shields help keep dirt out and the oil in.
Bronson uses its ceramic-additive oil for lubrication, with the brand describing the blend as helping protect against wear, moisture and corrosion. The oil is part of what protects the working surfaces, alongside the shields.
That combination makes more sense to look at than the colour of the shields. You’re getting a serviceable set of bearings with steel running surfaces and parts you can access when they need attention.
Durability, Lifespan and Breakage
Most people fit their bearings, skate them and leave them alone until they start playing up. So the useful question is how well they hold up between sessions, rather than how often you’re willing to take them apart.
The G2’s deep-groove raceways are intended to reduce side-impact damage, and the shields and oil help protect the inside from contamination. Those are useful features for durability, although they can’t make the bearings immune to wear or a bad impact.
There isn’t an honest number of months we can promise. How often you skate, the ground you ride and how much water and dirt gets inside all affect the lifespan. A set used regularly in wet conditions has a different job from one that mostly sees a dry park.
Can They Pop or Break?
G2 bearings can break, like other skate bearings. Bronson’s impact-resistance claims aren’t a promise that they’ll never fail, and a heavy impact or damaged internal parts can finish a set of bearings.
A loose shield isn’t the same thing as the bearing coming apart. If the cage is damaged, balls are missing or the bearing has seized, replace it. Cleaning won’t repair broken bearings. If it’s just dirt making otherwise intact bearings rough, a clean may still get more use out of them.
A Quick Word on Cleaning
If you do clean your bearings, remove the shields carefully, clean out the dirt, dry everything and re-lubricate before refitting. We’ve got a bearing maintenance guide for that. You don’t need to turn it into a weekly ritual, but don’t ignore a wheel that’s binding or a bearing that’s coming apart.
Would We Recommend Them?
For around £20, absolutely. G2s would be my pick, and I think they’re too often passed over for the more familiar red shields.
The price, removable shields and shared Bronson features make these bearings easy to recommend. You don’t need to be building an expensive setup to choose parts worth looking after.
Retail is £19.95, and we regularly have sales. Have a look at the current bearings selection if you fancy trying a set.