Bronson G3 Bearings Review
Bronson G3s are a quality set of bearings with a few extras over the G2. If you’re happy spending another tenner, there’s a proper difference in the construction to look at, beyond the tin they come in.
They retail at £29.95, and we regularly have sales, so check the bearings section before picking up a set.
What Are You Getting for £30?
The G3 sits above the G2 in Bronson’s range. Both use deep-groove raceways, removable shields and ceramic-additive oil, but the G3 adds micro-groove raceway surfaces and Bronson’s Max Impact cage.
Those are the main reasons to consider these bearings over the cheaper set. Bronson designed the cage around keeping the balls properly spaced and the oil circulating, with a glass-filled nylon construction intended to handle impacts.
There’s also more attention to the finish. Bronson says G3 bearings are hand inspected twice, then cleaned and polished through a three-stage process before being packaged in nitrogen to reduce exposure to moisture.
That’s factory preparation rather than a guarantee of how long they’ll last, but it helps explain where the extra money goes. At around £30, the G3 still sits comfortably within the price of a normal replacement set.
Raceways, Cage and the G3 Extras
The raceways are the tracks inside the bearings. Bronson puts the balls deeper into those channels, which the brand says helps reduce damage from sideways impacts. It’s a feature shared with the G2.
The G3 also gets micro-grooves on the raceway surfaces. Bronson describes these as helping the oil circulate around the contact points, with the aim of reducing friction and wear.
Then there’s the cage. It keeps the balls spaced inside the bearings, and the G3’s Max Impact version uses glass-filled nylon. Bronson says the design helps maintain that spacing under impact while leaving room for the oil to move.
That gives the G3 a clearer reason to exist alongside the G2. You can read the full explanation in Bronson’s bearing guide if you want to get into the details.
G3s or G2s?
If you’re keeping the cost down, G2 bearings are still a very good option. They retail at £19.95, and we regularly have sales. You get the same basic deep-groove approach, removable shields and Bronson’s oil without spending the extra tenner.
The G3 is for someone who wants the extra work in the raceways, cage and factory finish. At a retail price of £29.95, with regular sales here too, the step up is a fairly modest part of a complete setup.
Whether that’s worth it depends on your budget. There’s no need to replace perfectly good bearings just to move up a model. But if yours are due changing and £30 is comfortable, the G3 is well worth a look.
Our G2 review goes into the cheaper set in more detail.
Shields and Everyday Wear
The G3 has removable rubber shields to help keep oil in and dirt and moisture out. Keeping them fitted gives the inside of the bearings some protection from the dust and grit you pick up while skating.
Bronson describes the shields as pop-off resistant. That refers to the shields staying in place, rather than a promise that the whole bearing can’t break.
They’re useful for everyday wear, but they don’t make the bearings waterproof. Repeated wet sessions are still going to be harder on a set than dry ones, especially if the board gets put away wet afterwards.
What Are Bronson G3 Bearings Made Of?
G3 bearings use steel balls and races, a glass-filled nylon cage and removable rubber shields. The steel surfaces do the rolling, while the cage keeps the balls spaced and the shields help keep dirt out.
Bronson uses its ceramic-additive oil, which the brand describes as helping protect against wear, moisture and corrosion. That’s an additive in the lubricant, rather than a different material for the balls.
There’s one G3 detail worth checking when fitting them: the black pinstriped shields face outwards. That’s the orientation Bronson specifies for its “Balls Out” cage design.
Durability, Lifespan and Breakage
Most people fit their bearings, skate them and leave them alone until they start playing up. So the useful question is how well they hold up between sessions, rather than how often you’re willing to take them apart.
The G3’s deep-groove raceways are intended to reduce side-impact damage, and the shields and oil help protect the inside from contamination. Those are useful features for durability, although they can’t make the bearings immune to wear or a bad impact.
There isn’t an honest number of months we can promise. How often you skate, the ground you ride and how much water and dirt gets inside all affect the lifespan. A set used regularly in wet conditions has a different job from one that mostly sees a dry park.
Can They Pop or Break?
G3 bearings can break, like other skate bearings. Bronson’s impact-resistance claims aren’t a promise that they’ll never fail, and a heavy impact or damaged internal parts can end the life of a bearing.
A loose shield isn’t the same thing as the bearing coming apart. If the cage is damaged, balls are missing or the bearing has seized, replace it. Cleaning won’t repair broken bearings. If it’s just dirt making otherwise intact bearings rough, a clean may still get more use out of them.
That being said, G3's are really resilient and tend to hold up brilliantly.
A Quick Word on Cleaning
If you do clean your bearings, remove the shields carefully, clean out the dirt, dry everything and re-lubricate before refitting. We’ve got a bearing maintenance guide for that. You don’t need to turn it into a weekly ritual, but don’t ignore a wheel that’s binding or a bearing that’s coming apart.
Would We Recommend Them?
If you want a step up from the G2, the G3 makes a good case for the extra tenner. The raceway finish and Max Impact cage are meaningful construction differences, and the removable shields mean the bearings can be cleaned when they need it.
The G2 still makes sense if you’re watching the cost of a full setup. But for bearings around £30, the G3 has plenty going for it and is my personal bearing of choice at that price range.
Retail is £29.95, and we regularly have sales. Have a look at the current bearings selection if you fancy a set.